diff options
Diffstat (limited to 'dotfiles/dwm')
24 files changed, 0 insertions, 835 deletions
diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-battery b/dotfiles/dwm/.local/bin/statusbar/sb-battery deleted file mode 100755 index 93cbe08..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-battery +++ /dev/null @@ -1,37 +0,0 @@ -#!/bin/sh - -# Prints all batteries, their percentage remaining and an emoji corresponding -# to charge status (π for plugged up, π for discharging on battery, etc.). - -case $BLOCK_BUTTON in - 3) notify-send "π Battery module" "π: discharging -π: not charging -β»: stagnant charge -π: charging -β‘: charged -β: battery very low! -- Scroll to change adjust xbacklight." ;; - 4) xbacklight -inc 10 ;; - 5) xbacklight -dec 10 ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -# Loop through all attached batteries and format the info -for battery in /sys/class/power_supply/BAT?*; do - # If non-first battery, print a space separator. - [ -n "${capacity+x}" ] && printf " " - # Sets up the status and capacity - case "$(cat "$battery/status" 2>&1)" in - "Full") status="β‘" ;; - "Discharging") status="π" ;; - "Charging") status="π" ;; - "Not charging") status="π" ;; - "Unknown") status="β»οΈ" ;; - *) exit 1 ;; - esac - capacity="$(cat "$battery/capacity" 2>&1)" - # Will make a warn variable if discharging and low - [ "$status" = "π" ] && [ "$capacity" -le 25 ] && warn="β" - # Prints the info - printf "%s%s%d%%" "$status" "$warn" "$capacity"; unset warn -done && printf "\\n" diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-clock b/dotfiles/dwm/.local/bin/statusbar/sb-clock deleted file mode 100755 index e1ca8c7..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-clock +++ /dev/null @@ -1,29 +0,0 @@ -#!/bin/sh - -clock=$(date '+%I') - -case "$clock" in - "00") icon="π" ;; - "01") icon="π" ;; - "02") icon="π" ;; - "03") icon="π" ;; - "04") icon="π" ;; - "05") icon="π" ;; - "06") icon="π" ;; - "07") icon="π" ;; - "08") icon="π" ;; - "09") icon="π" ;; - "10") icon="π" ;; - "11") icon="π" ;; - "12") icon="π" ;; -esac - -case $BLOCK_BUTTON in - 1) notify-send "This Month" "$(cal --color=always | sed "s/..7m/<b><span color=\"red\">/;s|..27m|</span></b>|")" && notify-send "Appointments" "$(calcurse -d3)" ;; - 2) setsid -f "$TERMINAL" -e calcurse ;; - 3) notify-send "π
Time/date module" "\- Left click to show upcoming appointments for the next three days via \`calcurse -d3\` and show the month via \`cal\` -- Middle click opens calcurse if installed" ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -date "+%Y %b %d (%a) $icon%I:%M%p" diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-cpu b/dotfiles/dwm/.local/bin/statusbar/sb-cpu deleted file mode 100755 index 1572b52..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-cpu +++ /dev/null @@ -1,12 +0,0 @@ -#!/bin/sh - -case $BLOCK_BUTTON in - 1) notify-send "π₯ CPU hogs" "$(ps axch -o cmd:15,%cpu --sort=-%cpu | head)\\n(100% per core)" ;; - 2) setsid -f "$TERMINAL" -e htop ;; - 3) notify-send "π₯ CPU module " "\- Shows CPU temperature. -- Click to show intensive processes. -- Middle click to open htop." ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -sensors | awk '/Core 0/ {print "π‘" $3}' diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-cpubars b/dotfiles/dwm/.local/bin/statusbar/sb-cpubars deleted file mode 100755 index 297424e..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-cpubars +++ /dev/null @@ -1,44 +0,0 @@ -#!/bin/sh - -# Module showing CPU load as a changing bars. -# Just like in polybar. -# Each bar represents amount of load on one core since -# last run. - -# Cache in tmpfs to improve speed and reduce SSD load -cache=/tmp/cpubarscache - -case $BLOCK_BUTTON in - 2) setsid -f "$TERMINAL" -e htop ;; - 3) notify-send "πͺ¨ CPU load module" "Each bar represents -one CPU core";; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -# id total idle -stats=$(awk '/cpu[0-9]+/ {printf "%d %d %d\n", substr($1,4), ($2 + $3 + $4 + $5), $5 }' /proc/stat) -[ ! -f $cache ] && echo "$stats" > "$cache" -old=$(cat "$cache") -printf "πͺ¨" -echo "$stats" | while read -r row; do - id=${row%% *} - rest=${row#* } - total=${rest%% *} - idle=${rest##* } - - case "$(echo "$old" | awk '{if ($1 == id) - printf "%d\n", (1 - (idle - $3) / (total - $2))*100 /12.5}' \ - id="$id" total="$total" idle="$idle")" in - - "0") printf "β";; - "1") printf "β";; - "2") printf "β";; - "3") printf "β";; - "4") printf "β
";; - "5") printf "β";; - "6") printf "β";; - "7") printf "β";; - "8") printf "β";; - esac -done; printf "\\n" -echo "$stats" > "$cache" diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-disk b/dotfiles/dwm/.local/bin/statusbar/sb-disk deleted file mode 100755 index e947509..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-disk +++ /dev/null @@ -1,23 +0,0 @@ -#!/bin/sh - -# Status bar module for disk space -# $1 should be drive mountpoint, otherwise assumed /. - -location=${1:-/} - -[ -d "$location" ] || exit - -case $BLOCK_BUTTON in - 1) notify-send "π½ Disk space" "$(df -h --output=target,used,size)" ;; - 3) notify-send "π½ Disk module" "\- Shows used hard drive space. -- Click to show all disk info." ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -case "$location" in - "/home"* ) icon="π " ;; - "/mnt"* ) icon="πΎ" ;; - *) icon="π₯";; -esac - -printf "%s: %s\n" "$icon" "$(df -h "$location" | awk ' /[0-9]/ {print $3 "/" $2}')" diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-doppler b/dotfiles/dwm/.local/bin/statusbar/sb-doppler deleted file mode 100755 index b5833a7..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-doppler +++ /dev/null @@ -1,279 +0,0 @@ -#!/bin/sh - -# Show a Doppler RADAR of a user's preferred location. - -secs=600 # Download a new doppler radar if one hasn't been downloaded in $secs seconds. -radarloc="${XDG_CACHE_HOME:-$HOME/.cache}/radar" -doppler="${XDG_CACHE_HOME:-$HOME/.cache}/doppler.gif" - -pickloc() { chosen="$(echo "US: Northeast -US: Southeast -US: PacNorthWest -US: PacSouthWest -US: UpperMissVly -US: SouthMissVly -US: SouthPlains -US: NorthRockies -US: SouthRockies -US: Alaska -US: Carib -US: Hawaii -US: CentGrLakes -US: Conus-Large -US: KABR: Aberdeen, SD -US: KBIS: Bismarck, ND -US: KFTG: Denver/Boulder, CO -US: KDMX: Des Moines, IA -US: KDTX: Detroit, MI -US: KDDC: Dodge City, KS -US: KDLH: Duluth, MN -US: KCYS: Cheyenne, WY -US: KLOT: Chicago, IL -US: KGLD: Goodland, KS -US: KUEX: Hastings, NE -US: KGJX: Grand Junction, CO -US: KGRR: Grand Rapids, MI -US: KMVX: Fargo/Grand Forks, ND -US: KGRB: Green Bay, WI -US: KIND: Indianapolis, IN -US: KJKL: Jackson, KY -US: KARX: La Crosse, WI -US: KILX: Lincoln/Central Illinois, IL -US: KLVX: Louisville, KY -US: KMQT: Marquette -US: KMKX: Milwaukee, WI -US: KMPX: Minneapolis, MN -US: KAPX: Gaylord/Alpena, MI -US: KLNX: North Platte, NE -US: KIWX: N. Webster/Northern, IN -US: KOAX: Omaha, NE -US: KPAH: Paducah, KY -US: KEAX: Pleasant Hill, MO -US: KPUX: Pueblo, CO -US: KDVN: Quad Cities, IA -US: KUDX: Rapid City, SD -US: KRIW: Riverton, WY -US: KSGF: Springfield, MO -US: KLSX: St. LOUIS, MO -US: KFSD: Sioux Falls, IA -US: KTWX: Topeka, KS -US: KICT: Wichita, KS -US: KVWX: Paducah, KY -US: ICAO: Responsible Wfo -US: KLTX: WILMINGTON, NC -US: KCCX: State College/Central, PA -US: KLWX: Sterling, VA -US: KFCX: Blacksburg/Roanoke, VA -US: KRAX: Raleigh/Durham, NC -US: KGYX: Portland, ME -US: KDIX: Mt Holly/Philadelphia, PA -US: KPBZ: Pittsburgh, PA -US: KAKQ: Wakefield, VA -US: KMHX: Morehead City, NC -US: KGSP: Greer/Greenville/Sprtbg, SC -US: KILN: Wilmington/Cincinnati, OH -US: KCLE: Cleveland, OH -US: KCAE: Columbia, SC -US: KBGM: Binghamton, NY -US: KENX: Albany, NY -US: KBUF: Buffalo, NY -US: KCXX: Burlington, VT -US: KCBW: Caribou, ME -US: KBOX: Boston /Taunton, MA -US: KOKX: New York City, NY -US: KCLX: Charleston, SC -US: KRLX: Charleston, WV -US: ICAO: Responsible WFO -US: KBRO: Brownsville, TX -US: KABX: Albuquerque, NM -US: KAMA: Amarillo, TX -US: KFFC: Peachtree City/Atlanta, GA -US: KEWX: Austin/Sanantonio, TX -US: KBMX: Birmingham, AL -US: KCRP: Corpus Christi, TX -US: KFWS: Dallas / Ft. Worth, TX -US: KEPZ: El Paso, TX -US: KHGX: Houston/ Galveston, TX -US: KJAX: Jacksonville, FL -US: KBYX: Key West, FL -US: KMRX: Morristown/knoxville, TN -US: KLBB: Lubbock, TX -US: KLZK: Little Rock, AR -US: KLCH: Lake Charles, LA -US: KOHX: Nashville, TN -US: KMLB: Melbourne, FL -US: KNQA: Memphis, TN -US: KAMX: Miami, FL -US: KMAF: Midland/odessa, TX -US: KTLX: Norman, OK -US: KHTX: Huntsville, AL -US: KMOB: Mobile, AL -US: KTLH: Tallahassee, FL -US: KTBW: Tampa Bay Area, FL -US: KSJT: San Angelo, TX -US: KINX: Tulsa, OK -US: KSRX: Tulsa, OK -US: KLIX: New Orleans/slidell, LA -US: KDGX: Jackson, MS -US: KSHV: Shreveport, LA -US: ICAO: Responsible WFO -US: KLGX: Seattle / Tacoma, WA -US: KOTX: Spokane, WA -US: KEMX: Tucson, AZ -US: KYUX: Phoenix, AZ -US: KNKX: San Diego, CA -US: KMUX: Monterey/san Francisco, CA -US: KHNX: San Joaquin/hanford, CA -US: KSOX: San Diego, CA -US: KATX: Seattle / Tacoma, WA -US: KIWA: Phoenix, AZ -US: KRTX: Portland, OR -US: KSFX: Pocatello, ID -US: KRGX: Reno, NV -US: KDAX: Sacramento, CA -US: KMTX: Salt Lake City, UT -US: KPDT: Pendleton, OR -US: KMSX: Missoula, MT -US: KESX: Las Vegas, NV -US: KVTX: Los Angeles, CA -US: KMAX: Medford, OR -US: KFSX: Flagstaff, AZ -US: KGGW: Glasgow, MT -US: KLRX: Elko, NV -US: KBHX: Eureka, CA -US: KTFX: Great Falls, MT -US: KCBX: Boise, ID -US: KBLX: Billings, MT -US: KICX: Salt Lake City, UT -US: ICAO: Responsible Wfo W/ MSCF -US: PABC: Anchorage, AK -US: PAPD: Fairbanks, AK -US: PHKM: Honolulu, HI -US: PAHG: Anchorage, AK -US: PAKC: Anchorage, AK -US: PAIH: Anchorage, AK -US: PHMO: Honolulu, HI -US: PAEC: Fairbanks, AK -US: TJUA: San Juan, PR -US: PACG: Juneau, AK -US: PHKI: Honolulu, HI -US: PHWA: Honolulu, HI -US: ICAO: Responsible Wfo W/ MSCF -US: KFDR: Norman, OK -US: PGUA: Guam -US: KBBX: Sacramento, CA -US: KFDX: Albuquerque, NM -US: KGWX: Jackson, MS -US: KDOX: Wakefield, VA -US: KDYX: San Angelo, TX -US: KEYX: Las Vegas, NV -US: KEVX: Mobile, AL -US: KHPX: Paducah, KY -US: KTYX: Burlington, VT -US: KGRK: Dallas / Ft. Worth, TX -US: KPOE: Lake Charles, LA -US: KEOX: Tallahassee, FL -US: KHDX: El Paso, TX -US: KDFX: San Antonio, TX -US: KMXX: Birmingham, AL -US: KMBX: Bismarck, ND -US: KVAX: Jacksonville, FL -US: KJGX: Peachtree City/atlanta, GA -US: KVNX: Norman, OK -US: KVBX: Vandenberg Afb: Orcutt, CA -EU: Europe -EU: GB: Great Brittain -EU: SCAN: Scandinavia -EU: ALPS: The Alps -EU: NL: The Netherlands -EU: DE: Germany -EU: SP: Spain -EU: FR: France -EU: IT: Italy -EU: PL: Poland -EU: GR: Greece -EU: TU: Turkey -EU: RU: Russia -EU: BA: Bahrain -EU: BC: Botswana -EU: SE: Republic of Seychelles -EU: HU: Hungary -EU: UK: Ukraine -AF: AF: Africa -AF: WA: West Africa -AF: ZA: South Africa -AF: DZ: Algeria -AF: CE: Canary Islands -AF: NG: Nigeria -AF: TD: Chad -AF: CG: Democratic Republic of Congo -AF: EG: Egypt -AF: ET: Ethiopia -AF: CM: Cameroon -AF: IS: Israel -AF: LY: Libya -AF: MG: Madagascar -AF: MO: Morocco -AF: BW: Namibia -AF: SA: Saudi Arabia -AF: SO: Somalia -AF: SD: Sudan -AF: TZ: Tanzania -AF: TN: Tunisia -AF: ZM: Zambia -AF: KE: Kenya -AF: AO: Angola -DE: BAW: Baden-WΓΌrttemberg -DE: BAY: Bavaria -DE: BBB: Berlin -DE: BBB: Brandenburg -DE: HES: Hesse -DE: MVP: Mecklenburg-Western Pomerania -DE: NIB: Lower Saxony -DE: NIB: Bremen -DE: NRW: North Rhine-Westphalia -DE: RPS: Rhineland-Palatinate -DE: RPS: Saarland -DE: SAC: Saxony -DE: SAA: Saxony-Anhalt -DE: SHH: Schleswig-Holstein -DE: SHH: Hamburg -DE: THU: Thuringia" | dmenu -r -i -l 50 -p "Select a radar to use as default:" | tr "[:lower:]" "[:upper:]")" - -# Ensure user did not escape. -[ -z "$chosen" ] && exit 1 - -# Set continent code and radar code. -continentcode=${chosen%%:*} -radarcode=${chosen#* } radarcode=${radarcode%:*} - -# Print codes to $radarloc file. - printf "%s,%s\\n" "$continentcode" "$radarcode" > "$radarloc" ;} - -getdoppler() { - cont=$(cut -c -2 "$radarloc") - loc=$(cut -c 4- "$radarloc") - notify-send "π¦οΈ Doppler RADAR" "Pulling most recent Doppler RADAR for $loc." - case "$cont" in - "US") curl -sL "https://radar.weather.gov/ridge/lite/${loc}_loop.gif" > "$doppler" ;; - "EU") curl -sL "https://api.sat24.com/animated/${loc}/rainTMC/2/" > "$doppler" ;; - "AF") curl -sL "https://api.sat24.com/animated/${loc}/rain/2/" > "$doppler" ;; - "DE") loc="$(echo "$loc" | tr "[:upper:]" "[:lower:]")" - curl -sL "https://www.dwd.de/DWD/wetter/radar/radfilm_${loc}_akt.gif" > "$doppler" ;; - esac -} - -showdoppler() { setsid -f mpv --no-osc --loop=inf --no-terminal "$doppler" ;} - -case $BLOCK_BUTTON in - 1) [ ! -f "$radarloc" ] && pickloc && getdoppler - [ $(($(date '+%s') - $(stat -c %Y "$doppler"))) -gt "$secs" ] && getdoppler - showdoppler ;; - 2) pickloc && getdoppler && showdoppler ;; - 3) notify-send "πΊοΈ Doppler RADAR module" "\- Left click for local Doppler RADAR. -- Middle click to update RADAR location. -After $secs seconds, new clicks will also automatically update the doppler RADAR." ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -echo πΊοΈ diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-forecast b/dotfiles/dwm/.local/bin/statusbar/sb-forecast deleted file mode 100755 index 45584c5..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-forecast +++ /dev/null @@ -1,35 +0,0 @@ -#!/bin/sh - -# Displays todays precipication chance (β) and daily low (π₯Ά) and high (π). -# Usually intended for the statusbar. - -# If we have internet, get a weather report from wttr.in and store it locally. -# You could set up a shell alias to view the full file in a pager in the -# terminal if desired. This function will only be run once a day when needed. -weatherreport="${XDG_CACHE_HOME:-$HOME/.cache}/weatherreport" -getforecast() { curl -sf "wttr.in/$LOCATION" > "$weatherreport" || exit 1 ;} - -# Some very particular and terse stream manipulation. We get the maximum -# precipitation chance and the daily high and low from the downloaded file and -# display them with coresponding emojis. -showweather() { printf "%s" "$(sed '16q;d' "$weatherreport" | - grep -wo "[0-9]*%" | sort -rn | sed "s/^/β/g;1q" | tr -d '\n')" -sed '13q;d' "$weatherreport" | grep -o "m\\([-+]\\)*[0-9]\\+" | sed 's/+//g' | sort -n -t 'm' -k 2n | sed -e 1b -e '$!d' | tr '\n|m' ' ' | awk '{print " π₯Ά" $1 "Β°","π" $2 "Β°"}' ;} - -case $BLOCK_BUTTON in - 1) setsid -f "$TERMINAL" -e less -Srf "$weatherreport" ;; - 2) getforecast && showweather ;; - 3) notify-send "π Weather module" "\- Left click for full forecast. -- Middle click to update forecast. -β: Chance of rain/snow -π₯Ά: Daily low -π: Daily high" ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -# The test if our forcecast is updated to the day. If it isn't download a new -# weather report from wttr.in with the above function. -[ "$(stat -c %y "$weatherreport" 2>/dev/null | cut -d' ' -f1)" = "$(date '+%Y-%m-%d')" ] || - getforecast - -showweather diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-help-icon b/dotfiles/dwm/.local/bin/statusbar/sb-help-icon deleted file mode 100755 index 8fa4a52..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-help-icon +++ /dev/null @@ -1,17 +0,0 @@ -#!/bin/sh - -# The clickable help menu. Middle click to restart wm. - -# If dwm is running, use dwm's readme and restart. -pidof dwm >/dev/null && - READMEFILE=/usr/local/share/dwm/larbs.mom - restartwm() { pkill -HUP dwm ;} || - restartwm() { i3 restart ;} - -case $BLOCK_BUTTON in - 1) groff -mom "${READMEFILE:-${XDG_DATA_HOME:-$HOME/.local/share}/larbs/readme.mom}" -Tpdf | zathura - ;; - 2) restartwm ;; - 3) notify-send "β Help module" "\- Left click to open LARBS guide. -- Middle click to refresh window manager." ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac; echo "β" diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-internet b/dotfiles/dwm/.local/bin/statusbar/sb-internet deleted file mode 100755 index 94b7da2..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-internet +++ /dev/null @@ -1,26 +0,0 @@ -#!/bin/sh - -# Show wifi πΆ and percent strength or π‘ if none. -# Show π if connected to ethernet or β if none. -# Show π if a vpn connection is active - -case $BLOCK_BUTTON in - 1) "$TERMINAL" -e nmtui; pkill -RTMIN+4 dwmblocks ;; - 3) notify-send "π Internet module" "\- Click to connect -β: wifi disabled -π‘: no wifi connection -πΆ: wifi connection with quality -β: no ethernet -π: ethernet working -π: vpn is active -" ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -if grep -xq 'up' /sys/class/net/w*/operstate 2>/dev/null ; then - wifiicon="$(awk '/^\s*w/ { print "πΆ", int($3 * 100 / 70) "% " }' /proc/net/wireless)" -elif grep -xq 'down' /sys/class/net/w*/operstate 2>/dev/null ; then - grep -xq '0x1003' /sys/class/net/w*/flags && wifiicon="π‘ " || wifiicon="β " -fi - -printf "%s%s%s\n" "$wifiicon" "$(sed "s/down/β/;s/up/π/" /sys/class/net/e*/operstate 2>/dev/null)" "$(sed "s/.*/π/" /sys/class/net/tun*/operstate 2>/dev/null)" diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-iplocate b/dotfiles/dwm/.local/bin/statusbar/sb-iplocate deleted file mode 100755 index 02adab8..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-iplocate +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/sh - -# Gets your public ip address checks which country you are in and -# displays that information in the statusbar -# -# https://www.maketecheasier.com/ip-address-geolocation-lookups-linux/ - -ifinstalled "geoip" || exit -addr="$(curl ifconfig.me 2>/dev/null)" || exit -grep "flag: " "${XDG_DATA_HOME:-$HOME/.local/share}/larbs/emoji" | grep "$(geoiplookup "$addr" | sed 's/.*, //')" | sed "s/flag: //;s/;.*//" diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-kbselect b/dotfiles/dwm/.local/bin/statusbar/sb-kbselect deleted file mode 100755 index f0c923f..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-kbselect +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/sh -# works on any init system -# requirements: dmenu, xorg-setxkbmap -kb="$(setxkbmap -query | grep -oP 'layout:\s*\K\w+')" || exit 1 - -case $BLOCK_BUTTON in - 1) kb_choice="$(awk '/! layout/{flag=1; next} /! variant/{flag=0} flag {print $2, "- " $1}' /usr/share/X11/xkb/rules/base.lst | dmenu -l 15)" - kb="$(echo "$kb_choice" | awk '{print $3}')" - setxkbmap "$kb" - pkill -RTMIN+30 "${STATUSBAR:-dwmblocks}";; - 3) notify-send "β¨ Keyboard/language module" "$(printf "%s" "\- Current layout: $(setxkbmap -query | grep -oP 'layout:\s*\K\w+')") -- Left click to change keyboard.";; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -echo "$kb" diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-mailbox b/dotfiles/dwm/.local/bin/statusbar/sb-mailbox deleted file mode 100755 index 2132184..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-mailbox +++ /dev/null @@ -1,20 +0,0 @@ -#!/bin/sh - -# Displays number of unread mail and an loading icon if updating. -# When clicked, brings up `neomutt`. - -case $BLOCK_BUTTON in - 1) setsid -f "$TERMINAL" -e neomutt ;; - 2) setsid -f mw -Y >/dev/null ;; - 3) notify-send "π¬ Mail module" "\- Shows unread mail -- Shows π if syncing mail -- Left click opens neomutt -- Middle click syncs mail" ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -unread="$(find "${XDG_DATA_HOME:-$HOME/.local/share}"/mail/*/[Ii][Nn][Bb][Oo][Xx]/new/* -type f | wc -l 2>/dev/null)" - -pidof mbsync >/dev/null 2>&1 && icon="π" - -[ "$unread" = "0" ] && [ "$icon" = "" ] || echo "π¬$unread$icon" diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-memory b/dotfiles/dwm/.local/bin/statusbar/sb-memory deleted file mode 100755 index 01d3daf..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-memory +++ /dev/null @@ -1,12 +0,0 @@ -#!/bin/sh - -case $BLOCK_BUTTON in - 1) notify-send "π§ Memory hogs" "$(ps axch -o cmd:15,%mem --sort=-%mem | head)" ;; - 2) setsid -f "$TERMINAL" -e htop ;; - 3) notify-send "π§ Memory module" "\- Shows Memory Used/Total. -- Click to show memory hogs. -- Middle click to open htop." ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -free --mebi | sed -n '2{p;q}' | awk '{printf ("π§ %2.2fGiB/%2.2fGiB\n", ( $3 / 1024), ($2 / 1024))}' diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-moonphase b/dotfiles/dwm/.local/bin/statusbar/sb-moonphase deleted file mode 100755 index fab8b4d..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-moonphase +++ /dev/null @@ -1,37 +0,0 @@ -#!/bin/sh - -# Shows the current moon phase. - -moonfile="${XDG_DATA_HOME:-$HOME/.local/share}/moonphase" - -[ "$(stat -c %y "$moonfile" 2>/dev/null | cut -d' ' -f1)" = "$(date '+%Y-%m-%d')" ] || - { curl -sf "wttr.in/?format=%m" > "$moonfile" || exit 1 ;} - -icon="$(cat "$moonfile")" - -case "$icon" in - π) name="New" ;; - π) name="Waxing Crescent" ;; - π) name="First Quarter" ;; - π) name="Waxing Gibbous" ;; - π) name="Full" ;; - π) name="Waning Gibbous" ;; - π) name="Last Quarter" ;; - π) name="Waning Crescent" ;; - *) exit 1 ;; -esac - -echo "${icon-?}" - -case $BLOCK_BUTTON in - 3) notify-send "π Moon phase module" "Displays current moon phase. -- π: New -- π: Waxing Crescent -- π: First Quarter -- π: Waxing Gibbous -- π: Full -- π: Waning Gibbous -- π: Last Quarter -- π: Waning Crescent" ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-mpdup b/dotfiles/dwm/.local/bin/statusbar/sb-mpdup deleted file mode 100755 index af81a7d..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-mpdup +++ /dev/null @@ -1,8 +0,0 @@ -#!/bin/sh - -# This loop will update the mpd statusbar module whenever a command changes the -# music player's status. mpd must be running on X's start for this to work. - -while : ; do - mpc idle >/dev/null && kill -45 "$(pidof "${STATUSBAR:-dwmblocks}")" || break -done diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-music b/dotfiles/dwm/.local/bin/statusbar/sb-music deleted file mode 100755 index 7ea7032..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-music +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/sh - -filter() { mpc | sed "/^volume:/d;s/\\&/&/g;s/\\[paused\\].*/βΈ/g;/\\[playing\\].*/d;/^ERROR/Q" | paste -sd ' ' -;} - -pidof -x sb-mpdup >/dev/null 2>&1 || sb-mpdup >/dev/null 2>&1 & - -case $BLOCK_BUTTON in - 1) mpc status | filter ; setsid -f "$TERMINAL" -e ncmpcpp ;; # right click, pause/unpause - 2) mpc toggle | filter ;; # right click, pause/unpause - 3) mpc status | filter ; notify-send "π΅ Music module" "\- Shows mpd song playing. -- βΈ when paused. -- Left click opens ncmpcpp. -- Middle click pauses. -- Scroll changes track.";; # right click, pause/unpause - 4) mpc prev | filter ;; # scroll up, previous - 5) mpc next | filter ;; # scroll down, next - 6) mpc status | filter ; "$TERMINAL" -e "$EDITOR" "$0" ;; - *) mpc status | filter ;; -esac diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-nettraf b/dotfiles/dwm/.local/bin/statusbar/sb-nettraf deleted file mode 100755 index 178f677..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-nettraf +++ /dev/null @@ -1,29 +0,0 @@ -#!/bin/sh - -# Module showing network traffic. Shows how much data has been received (RX) or -# transmitted (TX) since the previous time this script ran. So if run every -# second, gives network traffic per second. - -case $BLOCK_BUTTON in - 1) setsid -f "$TERMINAL" -e bmon ;; - 3) notify-send "π Network traffic module" "π»: Traffic received -πΊ: Traffic transmitted" ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -update() { - sum=0 - for arg; do - read -r i < "$arg" - sum=$(( sum + i )) - done - cache=/tmp/${1##*/} - [ -f "$cache" ] && read -r old < "$cache" || old=0 - printf %d\\n "$sum" > "$cache" - printf %d\\n $(( sum - old )) -} - -rx=$(update /sys/class/net/[ew]*/statistics/rx_bytes) -tx=$(update /sys/class/net/[ew]*/statistics/tx_bytes) - -printf "π»%4sB πΊ%4sB\\n" $(numfmt --to=iec $rx $tx) diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-news b/dotfiles/dwm/.local/bin/statusbar/sb-news deleted file mode 100755 index fe701db..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-news +++ /dev/null @@ -1,17 +0,0 @@ -#!/bin/sh - -# Displays number of unread news items and an loading icon if updating. -# When clicked, brings up `newsboat`. - -case $BLOCK_BUTTON in - 1) setsid "$TERMINAL" -e newsboat ;; - 2) setsid -f newsup >/dev/null exit ;; - 3) notify-send "π° News module" "\- Shows unread news items -- Shows π if updating with \`newsup\` -- Left click opens newsboat -- Middle click syncs RSS feeds -<b>Note:</b> Only one instance of newsboat (including updates) may be running at a time." ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - - cat /tmp/newsupdate 2>/dev/null || echo "$(newsboat -x print-unread | awk '{ if($1>0) print "π°" $1}')$(cat "${XDG_CONFIG_HOME:-$HOME/.config}"/newsboat/.update 2>/dev/null)" diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-pacpackages b/dotfiles/dwm/.local/bin/statusbar/sb-pacpackages deleted file mode 100755 index 37ebed3..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-pacpackages +++ /dev/null @@ -1,29 +0,0 @@ -#!/bin/sh - -# Displays number of upgradeable packages. -# For this to work, have a `pacman -Sy` command run in the background as a -# cronjob every so often as root. This script will then read those packages. -# When clicked, it will run an upgrade via pacman. -# -# Add the following text as a file in /usr/share/libalpm/hooks/statusbar.hook: -# -# [Trigger] -# Operation = Upgrade -# Type = Package -# Target = * -# -# [Action] -# Description = Updating statusbar... -# When = PostTransaction -# Exec = /usr/bin/pkill -RTMIN+8 dwmblocks # Or i3blocks if using i3. - -case $BLOCK_BUTTON in - 1) setsid -f "$TERMINAL" -e sb-popupgrade ;; - 2) notify-send "$(/usr/bin/pacman -Qu)" ;; - 3) notify-send "π Upgrade module" "π¦: number of upgradable packages -- Left click to upgrade packages -- Middle click to show upgradable packages" ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -pacman -Qu | grep -Fcv "[ignored]" | sed "s/^/π¦/;s/^π¦0$//g" diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-popupgrade b/dotfiles/dwm/.local/bin/statusbar/sb-popupgrade deleted file mode 100755 index 29d6230..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-popupgrade +++ /dev/null @@ -1,9 +0,0 @@ -#!/bin/sh - -printf "Beginning upgrade.\\n" - -yay -Syu -pkill -RTMIN+8 "${STATUSBAR:-dwmblocks}" - -printf "\\nUpgrade complete.\\nPress <Enter> to exit window.\\n\\n" -read -r _ diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-price b/dotfiles/dwm/.local/bin/statusbar/sb-price deleted file mode 100755 index 42c84c1..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-price +++ /dev/null @@ -1,50 +0,0 @@ -#!/bin/sh - -# Usage: -# price <url> <Name of currency> <icon> <Price to show in> -# price bat "Basic Attention Token" π¦ -# When the name of the currency is multi-word, put it in quotes. - -[ -z "$3" ] && exit 1 - -# use $4 as currency, if not passed in use "usd" as default -currency="${4:-usd}" -interval="@14d" # History contained in chart preceded by '@' (7d = 7 days) -dir="${XDG_DATA_HOME:-$HOME/.local/share}/crypto-prices" -pricefile="$dir/$1-$currency" -chartfile="$dir/$1-$currency-chart" - -updateprice() { temp="$(mktemp)" - curl -s "$currency.rate.sx/1$1" > "$temp" && - mv -f "$temp" "$pricefile" && - curl -s "$currency.rate.sx/$1$interval" > "$temp" && - mv -f "$temp" "$chartfile" ;} - -[ -d "$dir" ] || mkdir -p "$dir" - -[ "$(stat -c %x "$pricefile" 2>/dev/null | cut -d' ' -f1)" != "$(date '+%Y-%m-%d')" ] && - updateprice "$1" - -case $BLOCK_BUTTON in - 1) setsid "$TERMINAL" -e less -Srf "$chartfile" ;; - 2) notify-send -u low "$3 Updating..." "Updating $2 price..." - updateprice "$1" && notify-send "$3 Update complete." "$2 price is now -\$$(cat "$pricefile")" ;; - 3) uptime="$(date -d "$(stat -c %x "$pricefile")" '+%D at %T' | sed "s|$(date '+%D')|Today|")" - notify-send "$3 $2 module" "\- <b>Exact price: \$$(cat "$pricefile")</b> -- Left click for chart of changes. -- Middle click to update. -- Shows π if updating prices. -- <b>Last updated: - $uptime</b>" ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -case "$currency" in - usd) symb="$" ;; - gbp) symb="Β£" ;; - eur) symb="β¬" ;; - btc) symb="βΏ" ;; -esac - -printf "$3$symb%0.2f$after" "$(cat "$pricefile")" diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-tasks b/dotfiles/dwm/.local/bin/statusbar/sb-tasks deleted file mode 100755 index 586300e..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-tasks +++ /dev/null @@ -1,20 +0,0 @@ -#!/bin/sh - -# Originally by Andr3as07 <https://github.com/Andr3as07> -# Some changes by Luke -# Rebuild by Tenyun - -# This block displays the number running background tasks. Requires tsp. - -num=$(tsp -l | awk -v numr=0 -v numq=0 '{if (/running/)numr++; if (/queued/)numq++} END{print numr+numq"("numq")"}') - -# Handle mouse clicks -case $BLOCK_BUTTON in - 1) setsid -f "$TERMINAL" -e tsp -l ;; - 3) notify-send "Tasks module" "π€: number of running/queued background tasks -- Left click opens tsp" ;; # Right click - 2) $EDITOR "$0" ;; # Middle click -esac - -[ "$num" != "0(0)" ] && - echo "π€$num" diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-torrent b/dotfiles/dwm/.local/bin/statusbar/sb-torrent deleted file mode 100755 index 6527005..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-torrent +++ /dev/null @@ -1,27 +0,0 @@ -#!/bin/sh - -transmission-remote -l | grep % | - sed " # The letters are for sorting and will not appear. - s/.*Stopped.*/A π/; - s/.*Seeding.*/Z π±/; - s/.*100%.*/N β
/; - s/.*Idle.*/B π°οΈ/; - s/.*Uploading.*/L β¬οΈ/; - s/.*%.*/M β¬οΈ/" | - sort -h | uniq -c | awk '{print $3 $1}' | paste -sd ' ' - - -case $BLOCK_BUTTON in - 1) setsid -f "$TERMINAL" -e tremc ;; - 2) td-toggle ;; - 3) notify-send "π± Torrent module" "\- Left click to open tremc. -- Middle click to toggle transmission. -- Shift click to edit script. -Module shows number of torrents: -π: paused -π°: idle (seeds needed) -πΌ: uploading (unfinished) -π½: downloading -β
: done -π±: done and seeding" ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac diff --git a/dotfiles/dwm/.local/bin/statusbar/sb-volume b/dotfiles/dwm/.local/bin/statusbar/sb-volume deleted file mode 100755 index 3cfdc45..0000000 --- a/dotfiles/dwm/.local/bin/statusbar/sb-volume +++ /dev/null @@ -1,30 +0,0 @@ -#!/bin/sh - -# Prints the current volume or π if muted. - -case $BLOCK_BUTTON in - 1) setsid -f "$TERMINAL" -e pulsemixer ;; - 2) pamixer -t ;; - 4) pamixer --allow-boost -i 1 ;; - 5) pamixer --allow-boost -d 1 ;; - 3) notify-send "π’ Volume module" "\- Shows volume π, π if muted. -- Middle click to mute. -- Scroll to change." ;; - 6) "$TERMINAL" -e "$EDITOR" "$0" ;; -esac - -[ $(pamixer --get-mute) = true ] && echo π && exit - -vol="$(pamixer --get-volume)" - -if [ "$vol" -gt "70" ]; then - icon="π" -elif [ "$vol" -gt "30" ]; then - icon="π" -elif [ "$vol" -gt "0" ]; then - icon="π" -else - echo π && exit -fi - -echo "$icon$vol%" |