diff options
Diffstat (limited to 'dotfiles/system/.config/ranger/rifle.conf')
| -rw-r--r-- | dotfiles/system/.config/ranger/rifle.conf | 257 |
1 files changed, 257 insertions, 0 deletions
diff --git a/dotfiles/system/.config/ranger/rifle.conf b/dotfiles/system/.config/ranger/rifle.conf new file mode 100644 index 0000000..f18ace8 --- /dev/null +++ b/dotfiles/system/.config/ranger/rifle.conf @@ -0,0 +1,257 @@ +# vim: ft=cfg +# +# This is the configuration file of "rifle", ranger's file executor/opener. +# Each line consists of conditions and a command. For each line the conditions +# are checked and if they are met, the respective command is run. +# +# Syntax: +# <condition1> , <condition2> , ... = command +# +# The command can contain these environment variables: +# $1-$9 | The n-th selected file +# $@ | All selected files +# +# If you use the special command "ask", rifle will ask you what program to run. +# +# Prefixing a condition with "!" will negate its result. +# These conditions are currently supported: +# match <regexp> | The regexp matches $1 +# ext <regexp> | The regexp matches the extension of $1 +# mime <regexp> | The regexp matches the mime type of $1 +# name <regexp> | The regexp matches the basename of $1 +# path <regexp> | The regexp matches the absolute path of $1 +# has <program> | The program is installed (i.e. located in $PATH) +# env <variable> | The environment variable "variable" is non-empty +# file | $1 is a file +# directory | $1 is a directory +# number <n> | change the number of this command to n +# terminal | stdin, stderr and stdout are connected to a terminal +# X | $DISPLAY is not empty (i.e. Xorg runs) +# +# There are also pseudo-conditions which have a "side effect": +# flag <flags> | Change how the program is run. See below. +# label <label> | Assign a label or name to the command so it can +# | be started with :open_with <label> in ranger +# | or `rifle -p <label>` in the standalone executable. +# else | Always true. +# +# Flags are single characters which slightly transform the command: +# f | Fork the program, make it run in the background. +# | New command = setsid $command >& /dev/null & +# r | Execute the command with root permissions +# | New command = sudo $command +# t | Run the program in a new terminal. If $TERMCMD is not defined, +# | rifle will attempt to extract it from $TERM. +# | New command = $TERMCMD -e $command +# Note: The "New command" serves only as an illustration, the exact +# implementation may differ. +# Note: When using rifle in ranger, there is an additional flag "c" for +# only running the current file even if you have marked multiple files. + +#------------------------------------------- +# Websites +#------------------------------------------- +# Rarely installed browsers get higher priority; It is assumed that if you +# install a rare browser, you probably use it. Firefox/konqueror/w3m on the +# other hand are often only installed as fallback browsers. +ext x?html?, has surf, X, flag f = surf -- file://"$1" +ext x?html?, has vimprobable, X, flag f = vimprobable -- "$@" +ext x?html?, has vimprobable2, X, flag f = vimprobable2 -- "$@" +ext x?html?, has qutebrowser, X, flag f = qutebrowser -- "$@" +ext x?html?, has dwb, X, flag f = dwb -- "$@" +ext x?html?, has jumanji, X, flag f = jumanji -- "$@" +ext x?html?, has luakit, X, flag f = luakit -- "$@" +ext x?html?, has uzbl, X, flag f = uzbl -- "$@" +ext x?html?, has uzbl-tabbed, X, flag f = uzbl-tabbed -- "$@" +ext x?html?, has uzbl-browser, X, flag f = uzbl-browser -- "$@" +ext x?html?, has uzbl-core, X, flag f = uzbl-core -- "$@" +ext x?html?, has midori, X, flag f = midori -- "$@" +ext x?html?, has chromium-browser, X, flag f = chromium-browser -- "$@" +ext x?html?, has chromium, X, flag f = chromium -- "$@" +ext x?html?, has google-chrome, X, flag f = google-chrome -- "$@" +ext x?html?, has opera, X, flag f = opera -- "$@" +ext x?html?, has firefox, X, flag f = firefox -- "$@" +ext x?html?, has seamonkey, X, flag f = seamonkey -- "$@" +ext x?html?, has iceweasel, X, flag f = iceweasel -- "$@" +ext x?html?, has epiphany, X, flag f = epiphany -- "$@" +ext x?html?, has konqueror, X, flag f = konqueror -- "$@" +ext x?html?, has elinks, terminal = elinks "$@" +ext x?html?, has links2, terminal = links2 "$@" +ext x?html?, has links, terminal = links "$@" +ext x?html?, has lynx, terminal = lynx -- "$@" +ext x?html?, has w3m, terminal = w3m "$@" + +#------------------------------------------- +# Misc +#------------------------------------------- +# Define the "editor" for text files as first action +mime ^text, label editor = ${VISUAL:-$EDITOR} -- "$@" +mime ^text, label pager = "$PAGER" -- "$@" +!mime ^text, label editor, ext xml|json|csv|tex|py|pl|rb|js|sh|php = ${VISUAL:-$EDITOR} -- "$@" +!mime ^text, label pager, ext xml|json|csv|tex|py|pl|rb|js|sh|php = "$PAGER" -- "$@" + +ext 1 = man "$1" +ext s[wmf]c, has zsnes, X = zsnes "$1" +ext s[wmf]c, has snes9x-gtk,X = snes9x-gtk "$1" +ext nes, has fceux, X = fceux "$1" +ext exe = wine "$1" +name ^[mM]akefile$ = make + +#-------------------------------------------- +# Code +#------------------------------------------- +ext py = python3 -- "$1" +ext pl = perl -- "$1" +ext rb = ruby -- "$1" +ext js = node -- "$1" +ext sh = sh -- "$1" +ext php = php -- "$1" + +#-------------------------------------------- +# Audio without X +#------------------------------------------- +mime ^audio|ogg$, terminal, has mpv = mpv -- "$@" +mime ^audio|ogg$, terminal, has mplayer2 = mplayer2 -- "$@" +mime ^audio|ogg$, terminal, has mplayer = mplayer -- "$@" +ext midi?, terminal, has wildmidi = wildmidi -- "$@" + +#-------------------------------------------- +# Video/Audio with a GUI +#------------------------------------------- +mime ^video|audio, has vlc, X, flag f = vlc -- "$@" +mime ^video, has mpv, X, flag f = mpv -- "$@" +mime ^video, has mpv, X, flag f = mpv --fs -- "$@" +mime ^video|audio, has gmplayer, X, flag f = gmplayer -- "$@" +mime ^video|audio, has smplayer, X, flag f = smplayer "$@" +mime ^video, has mplayer2, X, flag f = mplayer2 -- "$@" +mime ^video, has mplayer2, X, flag f = mplayer2 -fs -- "$@" +mime ^video, has mplayer, X, flag f = mplayer -- "$@" +mime ^video, has mplayer, X, flag f = mplayer -fs -- "$@" +mime ^video|audio, has totem, X, flag f = totem -- "$@" +mime ^video|audio, has totem, X, flag f = totem --fullscreen -- "$@" + +#-------------------------------------------- +# Video without X: +#------------------------------------------- +mime ^video, terminal, !X, has mpv = mpv -- "$@" +mime ^video, terminal, !X, has mplayer2 = mplayer2 -- "$@" +mime ^video, terminal, !X, has mplayer = mplayer -- "$@" + +#------------------------------------------- +# Documents +#------------------------------------------- +ext pdf, has llpp, X, flag f = llpp "$@" +ext pdf, has zathura, X, flag f = zathura -- "$@" +ext pdf, has mupdf, X, flag f = mupdf "$@" +ext pdf, has mupdf-x11,X, flag f = mupdf-x11 "$@" +ext pdf, has apvlv, X, flag f = apvlv -- "$@" +ext pdf, has xpdf, X, flag f = xpdf -- "$@" +ext pdf, has evince, X, flag f = evince -- "$@" +ext pdf, has atril, X, flag f = atril -- "$@" +ext pdf, has okular, X, flag f = okular -- "$@" +ext pdf, has epdfview, X, flag f = epdfview -- "$@" +ext pdf, has qpdfview, X, flag f = qpdfview "$@" +ext pdf, has open, X, flag f = open "$@" + +ext docx?, has catdoc, terminal = catdoc -- "$@" | "$PAGER" + +ext sxc|xlsx?|xlt|xlw|gnm|gnumeric, has gnumeric, X, flag f = gnumeric -- "$@" +ext sxc|xlsx?|xlt|xlw|gnm|gnumeric, has kspread, X, flag f = kspread -- "$@" +ext pptx?|od[dfgpst]|docx?|sxc|xlsx?|xlt|xlw|gnm|gnumeric, has libreoffice, X, flag f = libreoffice "$@" +ext pptx?|od[dfgpst]|docx?|sxc|xlsx?|xlt|xlw|gnm|gnumeric, has soffice, X, flag f = soffice "$@" +ext pptx?|od[dfgpst]|docx?|sxc|xlsx?|xlt|xlw|gnm|gnumeric, has ooffice, X, flag f = ooffice "$@" + +ext djvu, has zathura,X, flag f = zathura -- "$@" +ext djvu, has evince, X, flag f = evince -- "$@" +ext djvu, has atril, X, flag f = atril -- "$@" +ext djvu, has djview, X, flag f = djview -- "$@" + +ext epub, has zathura, X, flag f = zathura -- "$@" +ext mobi, has ebook-viewer, X, flag f = ebook-viewer -- "$@" + +#------------------------------------------- +# Image Viewing: +#------------------------------------------- +mime ^image/svg, has inkscape, X, flag f = inkscape -- "$@" +mime ^image/svg, has display, X, flag f = display -- "$@" + +mime ^image, has pqiv, X, flag f = pqiv -- "$@" +mime ^image, has nsxiv, X, flag f = nsxiv -- "$@" +mime ^image, has sxiv, X, flag f = sxiv -- "$@" +mime ^image, has feh, X, flag f = feh -- "$@" +mime ^image, has mirage, X, flag f = mirage -- "$@" +mime ^image, has ristretto, X, flag f = ristretto "$@" +mime ^image, has eog, X, flag f = eog -- "$@" +mime ^image, has eom, X, flag f = eom -- "$@" +mime ^image, has nomacs, X, flag f = nomacs -- "$@" +mime ^image, has geeqie, X, flag f = geeqie -- "$@" +mime ^image, has gwenview, X, flag f = gwenview -- "$@" +mime ^image, has gimp, X, flag f = gimp -- "$@" +ext xcf, X, flag f = gimp -- "$@" + +#------------------------------------------- +# Archives +#------------------------------------------- + +# avoid password prompt by providing empty password +ext 7z, has 7z = 7z -p l "$@" | "$PAGER" +# This requires atool +ext ace|ar|arc|bz2?|cab|cpio|cpt|deb|dgc|dmg|gz, has atool = atool --list --each -- "$@" | "$PAGER" +ext iso|jar|msi|pkg|rar|shar|tar|tgz|xar|xpi|xz|zip, has atool = atool --list --each -- "$@" | "$PAGER" +ext 7z|ace|ar|arc|bz2?|cab|cpio|cpt|deb|dgc|dmg|gz, has atool = atool --extract --each -- "$@" +ext iso|jar|msi|pkg|rar|shar|tar|tgz|xar|xpi|xz|zip, has atool = atool --extract --each -- "$@" + +# Listing and extracting archives without atool: +ext tar|gz|bz2|xz, has tar = tar vvtf "$1" | "$PAGER" +ext tar|gz|bz2|xz, has tar = for file in "$@"; do tar vvxf "$file"; done +ext bz2, has bzip2 = for file in "$@"; do bzip2 -dk "$file"; done +ext zip, has unzip = unzip -l "$1" | "$PAGER" +ext zip, has unzip = for file in "$@"; do unzip -d "${file%.*}" "$file"; done +ext ace, has unace = unace l "$1" | "$PAGER" +ext ace, has unace = for file in "$@"; do unace e "$file"; done +ext rar, has unrar = unrar l "$1" | "$PAGER" +ext rar, has unrar = for file in "$@"; do unrar x "$file"; done + +#------------------------------------------- +# Flag t fallback terminals +#------------------------------------------- +# Rarely installed terminal emulators get higher priority; It is assumed that +# if you install a rare terminal emulator, you probably use it. +# gnome-terminal/konsole/xterm on the other hand are often installed as part of +# a desktop environment or as fallback terminal emulators. +mime ^ranger/x-terminal-emulator, has terminator = terminator -x "$@" +mime ^ranger/x-terminal-emulator, has st = st -e "$@" +mime ^ranger/x-terminal-emulator, has terminology = terminology -e "$@" +mime ^ranger/x-terminal-emulator, has kitty = kitty -- "$@" +mime ^ranger/x-terminal-emulator, has alacritty = alacritty -e "$@" +mime ^ranger/x-terminal-emulator, has sakura = sakura -e "$@" +mime ^ranger/x-terminal-emulator, has lilyterm = lilyterm -e "$@" +#mime ^ranger/x-terminal-emulator, has cool-retro-term = cool-retro-term -e "$@" +mime ^ranger/x-terminal-emulator, has termite = termite -x '"$@"' +#mime ^ranger/x-terminal-emulator, has yakuake = yakuake -e "$@" +mime ^ranger/x-terminal-emulator, has guake = guake -ne "$@" +mime ^ranger/x-terminal-emulator, has tilda = tilda -c "$@" +mime ^ranger/x-terminal-emulator, has urxvt = urxvt -e "$@" +mime ^ranger/x-terminal-emulator, has pantheon-terminal = pantheon-terminal -e "$@" +mime ^ranger/x-terminal-emulator, has lxterminal = lxterminal -e "$@" +mime ^ranger/x-terminal-emulator, has mate-terminal = mate-terminal -x "$@" +mime ^ranger/x-terminal-emulator, has xfce4-terminal = xfce4-terminal -x "$@" +mime ^ranger/x-terminal-emulator, has konsole = konsole -e "$@" +mime ^ranger/x-terminal-emulator, has gnome-terminal = gnome-terminal -- "$@" +mime ^ranger/x-terminal-emulator, has xterm = xterm -e "$@" + +#------------------------------------------- +# Misc +#------------------------------------------- +label wallpaper, number 11, mime ^image, has feh, X = feh --bg-scale "$1" +label wallpaper, number 12, mime ^image, has feh, X = feh --bg-tile "$1" +label wallpaper, number 13, mime ^image, has feh, X = feh --bg-center "$1" +label wallpaper, number 14, mime ^image, has feh, X = feh --bg-fill "$1" + +# Define the editor for non-text files + pager as last action + !mime ^text, !ext xml|json|csv|tex|py|pl|rb|js|sh|php = ask +label editor, !mime ^text, !ext xml|json|csv|tex|py|pl|rb|js|sh|php = ${VISUAL:-$EDITOR} -- "$@" +label pager, !mime ^text, !ext xml|json|csv|tex|py|pl|rb|js|sh|php = "$PAGER" -- "$@" + +# The very last action, so that it's never triggered accidentally, is to execute a program: +mime application/x-executable = "$1" |