17 files changed, 0 insertions, 648 deletions

diff --git a/dotfiles/dwm/.local/bin/audioselect b/dotfiles/dwm/.local/bin/audioselect
deleted file mode 100755
index 6c40d47..0000000
--- a/dotfiles/dwm/.local/bin/audioselect
+++ /dev/null
@@ -1,68 +0,0 @@
-#!/bin/sh
-# Craig Jennings
-# convenience script to switch audio devices
-# need bluez and bluez-utils
-
-# DEVICE MAC ADDRESSES
-marshall_earbuds_device="00:25:D1:1B:39:CA"
-marshall_headset_device="9C:0D:AC:05:1E:C9"
-
-# SINKS (Audio Out)
-marshall_headset_sink="bluez_output.9C_0D_AC_05_1E_C9.a2dp-sink"
-marshall_earbuds_sink="bluez_output.00_25_D1_1B_39_CA.a2dp_sink"
-builtin_sink="alsa_output.pci-0000_00_1f.3.analog-stereo"
-jabra_510_sink="alsa_output.usb-0b0e_Jabra_SPEAK_510_USB_1C48F9C067D5020A00-00.analog-stereo"
-steelseries_sink="alsa_output.usb-SteelSeries_SteelSeries_Arctis_7-00.stereo-game"
-emberton_sink="bluez_sink.04_21_44_89_D0_BE.a2dp_sink"
-
-# SOURCES (Audio In)
-jabra_510_source="alsa_input.usb-0b0e_Jabra_SPEAK_510_USB_1C48F9C067D5020A00-00.mono-fallback"
-builtin_source="alsa_input.pci-0000_00_1f.3.analog-stereo"
-steelseries_source="alsa_input.usb-SteelSeries_SteelSeries_Arctis_7-00.mono-chat"
-
-CHOICES="Cancel\nToggle Mute Speaker\nToggle Mute Mic\nMarshall Headset & Jabra Mic\nMarshall Headset & Default Mic\nMarshall Earbuds & Jabra Mic\nJabra Speaker & Mic\nBuilt-In Audio"
-
-CHOSEN=$(echo -e "$CHOICES" | dmenu -l 10)
-
-case "$CHOSEN" in
-"Toggle Mute Speaker")
-	pactl set-sink-mute 0 toggle
-    ;;
-"Toggle Mute Mic")
-    pactl set-source-mute 0 toggle
-    ;;
-"Marshall Headset & Jabra Mic")
-    bluetooth power on
-    bluetoothctl connect $marshall_headset_device
-    pactl set-default-sink $marshall_headset_sink
-    pactl set-default-source $jabra_510_source
-    ;;
-"Marshall Headset & Default Mic")
-    bluetooth power on
-    bluetoothctl connect $marshall_headset_device
-    pactl set-default-sink $marshall_headset_sink
-    pactl set-default-source $builtin_source
-    ;;
-"Marshall Earbuds & Jabra Mic")
-    bluetooth power on
-    bluetoothctl connect $marshall_earbuds_device
-    pactl set-default-sink $marshall_earbuds_sink
-    pactl set-default-source $jabra_510_source
-    ;;
-"Built-In Audio")
-    pactl set-default-sink $builtin_audio_sink
-    pactl set-default-source $builtin_audio_source
-    ;;
-"Jabra Speaker & Mic")
-    pactl set-default-sink $jabra_510_sink
-    pactl set-default-source $jabra_510_source
-    ;;
-"Emberton & Built-In")
-    pactl set-default-sink $emberton_sink
-    pactl set-default-source  $builtin_audio_source
-    ;;
-"Steelseries Headset")
-    pactl set-default-sink $steelseries_sink
-    pactl set-default-source $steelseries_source
-    ;;
-esac
diff --git a/dotfiles/dwm/.local/bin/battery_monitor b/dotfiles/dwm/.local/bin/battery_monitor
deleted file mode 100755
index dc8d5ea..0000000
--- a/dotfiles/dwm/.local/bin/battery_monitor
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/usr/bin/env bash
-# battery_monitor
-# Intended to be run via .xinitrc
-# - Exit automatically if no battery (desktop)
-# - When below 15%, warn user of low battery
-# - When below 10%, suspend within 10 seconds if not charging
-#
-# Craig Jennings <c@cjennings.net>
-
-# check if acpi is installed
-if ! command -v acpi &> /dev/null; then
-	echo "acpi is not installed. Cannot continue. Exiting...."
-	exit 1
-fi
-
-# exit if a battery exists
-if [ ! -d "/sys/class/power_supply/BAT0" ] && [ ! -d "/sys/class/power_supply/BAT1" ]; then
-	echo "Acpi is installed but no battery detected. Assuming this is a desktop and exiting...."
-	exit 1
-fi
-
-while true; do
-	# Get the current battery percentage using acpi
-	battery_percentage=$(acpi -b | awk -F ', ' '{print $2}' | tr -d '%')
-	# battery_percentage=$(acpi -b | awk -F ', ' '{print $2}' | sed 's/%//')
-
-	# When below 10%, suspend within 10 seconds if not charging
-	if [ "$battery_percentage" -lt 11 ] && ! acpi -a | grep -q "on-line" ; then
-		# Send a notification of sleeping in 10 seconds
-        notify-send -u critical "Critical Battery" "Battery is at $battery_percentage%. System entering sleep in 30 seconds."
-
-		# sleep for 10 seconds, then abort if charging
-		sleep 30
-
-		# Check if the system is charging (AC adapter connected)
-		if acpi -a | grep -q "on-line"; then
-			notify-send "Charging" "The system is now charging. No action taken."
-		else
-            notify-send -u critical "Critical Battery" "Putting the system to sleep."
-			sudo systemctl suspend
-		fi
-	fi
-
-	# When below 15%, warn user
-	if [ "$battery_percentage" -lt 15 ] && ! acpi -a | grep -q "on-line" ; then
-		# Send a notification using notify-send and dunst
-        notify-send -u critical "Low Battery" "Battery is at $battery_percentage%. System will automatically sleep at 10%."
-	fi
-
-	# Sleep for 5 minutes before checking again
-	sleep 300
-done
diff --git a/dotfiles/dwm/.local/bin/bookfind b/dotfiles/dwm/.local/bin/bookfind
deleted file mode 100755
index c5cc1bc..0000000
--- a/dotfiles/dwm/.local/bin/bookfind
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-# allows user to open a calibre book using dmenu 
-
-find  ~/Library/ -type f \( -iname \*.pdf -o -iname \*.epub \) | dmenu -i -l 20 -p "Choose an ebook:" 
-
diff --git a/dotfiles/dwm/.local/bin/displayselect b/dotfiles/dwm/.local/bin/displayselect
deleted file mode 100755
index f9e8062..0000000
--- a/dotfiles/dwm/.local/bin/displayselect
+++ /dev/null
@@ -1,83 +0,0 @@
-#!/bin/sh
-
-# A UI for detecting and selecting all displays. Probes xrandr for connected
-# displays and lets user select one to use. User may also select "manual
-# selection" which opens arandr.
-
-twoscreen() { # If multi-monitor is selected and there are two screens.
-
-    mirror=$(printf "no\\nyes" | dmenu -i -p "Mirror displays?")
-    # Mirror displays using native resolution of external display and a scaled
-    # version for the internal display
-    if [ "$mirror" = "yes" ]; then
-        external=$(echo "$screens" | dmenu -i -p "Optimize resolution for:")
-        internal=$(echo "$screens" | grep -v "$external")
-
-        res_external=$(xrandr --query | sed -n "/^$external/,/\+/p" | \
-            tail -n 1 | awk '{print $1}')
-        res_internal=$(xrandr --query | sed -n "/^$internal/,/\+/p" | \
-            tail -n 1 | awk '{print $1}')
-
-        res_ext_x=$(echo "$res_external" | sed 's/x.*//')
-        res_ext_y=$(echo "$res_external" | sed 's/.*x//')
-        res_int_x=$(echo "$res_internal" | sed 's/x.*//')
-        res_int_y=$(echo "$res_internal" | sed 's/.*x//')
-
-        scale_x=$(echo "$res_ext_x / $res_int_x" | bc -l)
-        scale_y=$(echo "$res_ext_y / $res_int_y" | bc -l)
-
-        xrandr --output "$external" --auto --scale 1.0x1.0 \
-            --output "$internal" --auto --same-as "$external" \
-            --scale "$scale_x"x"$scale_y"
-    else
-
-        primary=$(echo "$screens" | dmenu -i -p "Select primary display:")
-        secondary=$(echo "$screens" | grep -v "$primary")
-        direction=$(printf "left\\nright" | dmenu -i -p "What side of $primary should $secondary be on?")
-        xrandr --output "$primary" --auto --scale 1.0x1.0 --output "$secondary" --"$direction"-of "$primary" --auto --scale 1.0x1.0
-    fi
-    }
-
-morescreen() { # If multi-monitor is selected and there are more than two screens.
-	primary=$(echo "$screens" | dmenu -i -p "Select primary display:")
-	secondary=$(echo "$screens" | grep -v "$primary" | dmenu -i -p "Select secondary display:")
-	direction=$(printf "left\\nright" | dmenu -i -p "What side of $primary should $secondary be on?")
-	tertiary=$(echo "$screens" | grep -v "$primary" | grep -v "$secondary" | dmenu -i -p "Select third display:")
-	xrandr --output "$primary" --auto --output "$secondary" --"$direction"-of "$primary" --auto --output "$tertiary" --"$(printf "left\\nright" | grep -v "$direction")"-of "$primary" --auto
-	}
-
-multimon() { # Multi-monitor handler.
-	case "$(echo "$screens" | wc -l)" in
-		2) twoscreen ;;
-		*) morescreen ;;
-	esac ;}
-
-onescreen() { # If only one output available or chosen.
-	xrandr --output "$1" --auto --scale 1.0x1.0 $(echo "$allposs" | grep -v "\b$1" | awk '{print "--output", $1, "--off"}' | paste -sd ' ' -)
-	}
-
-postrun() { # Stuff to run to clean up.
-	setbg		# Fix background if screen size/arangement has changed.
-	remaps		# Re-remap keys if keyboard added (for laptop bases)
-	{ killall dunst ; setsid -f dunst ;} >/dev/null 2>&1 # Restart dunst to ensure proper location on screen
-	}
-
-# Get all possible displays
-allposs=$(xrandr -q | grep "connected")
-
-# Get all connected screens.
-screens=$(echo "$allposs" | awk '/ connected/ {print $1}')
-
-# If there's only one screen
-[ "$(echo "$screens" | wc -l)" -lt 2 ] &&
-	{ onescreen "$screens"; postrun; notify-send "💻 Only one screen detected." "Using it in its optimal settings...";  exit ;}
-
-# Get user choice including multi-monitor and manual selection:
-chosen=$(printf "%s\\nmulti-monitor\\nmanual selection" "$screens" | dmenu -i -p "Select display arangement:") &&
-case "$chosen" in
-	"manual selection") arandr ; exit ;;
-	"multi-monitor") multimon ;;
-	*) onescreen "$chosen" ;;
-esac
-
-postrun
diff --git a/dotfiles/dwm/.local/bin/dmenuhandler b/dotfiles/dwm/.local/bin/dmenuhandler
deleted file mode 100755
index 1c48f3a..0000000
--- a/dotfiles/dwm/.local/bin/dmenuhandler
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/sh
-
-# Feed this script a link and it will give dmenu
-# some choice programs to use to open it.
-feed="${1:-$(printf "%s" | dmenu -p 'Paste URL or file path')}"
-
-case "$(printf "Copy URL\\nsxiv\\nsetbg\\nPDF\\nbrowser\\nlynx\\nvim\\nmpv\\nmpv loop\\nmpv float\\nqueue download\\nqueue yt-dlp\\nqueue yt-dlp audio" | dmenu -i -p "Open it with?")" in
-	"Copy URL") echo "$feed" | xclip -selection clipboard ;;
-	mpv) setsid -f mpv -quiet "$feed" >/dev/null 2>&1 ;;
-	"mpv loop") setsid -f mpv -quiet --loop "$feed" >/dev/null 2>&1 ;;
-	"mpv float") setsid -f "$TERMINAL" -e mpv --geometry=+0-0 --autofit=30%  --title="mpvfloat" "$feed" >/dev/null 2>&1 ;;
-	"queue yt-dlp") qndl "$feed" >/dev/null 2>&1 ;;
-	"queue yt-dlp audio") qndl "$feed" 'yt-dlp --embed-metadata -icx -f bestaudio/best' >/dev/null 2>&1 ;;
-	"queue download") qndl "$feed" 'curl -LO' >/dev/null 2>&1 ;;
-	PDF) curl -sL "$feed" > "/tmp/$(echo "$feed" | sed "s|.*/||;s/%20/ /g")" && zathura "/tmp/$(echo "$feed" | sed "s|.*/||;s/%20/ /g")"  >/dev/null 2>&1 ;;
-	sxiv) curl -sL "$feed" > "/tmp/$(echo "$feed" | sed "s|.*/||;s/%20/ /g")" && sxiv -a "/tmp/$(echo "$feed" | sed "s|.*/||;s/%20/ /g")"  >/dev/null 2>&1 ;;
-	vim) curl -sL "$feed" > "/tmp/$(echo "$feed" | sed "s|.*/||;s/%20/ /g")" && setsid -f "$TERMINAL" -e "$EDITOR" "/tmp/$(echo "$feed" | sed "s|.*/||;s/%20/ /g")"  >/dev/null 2>&1 ;;
-	setbg) curl -L "$feed" > $XDG_CACHE_HOME/pic ; xwallpaper --zoom $XDG_CACHE_HOME/pic >/dev/null 2>&1 ;;
-	browser) setsid -f "$BROWSER" "$feed" >/dev/null 2>&1 ;;
-	lynx) lynx "$feed" >/dev/null 2>&1 ;;
-esac
diff --git a/dotfiles/dwm/.local/bin/dmenumount b/dotfiles/dwm/.local/bin/dmenumount
deleted file mode 100755
index 3cb1f81..0000000
--- a/dotfiles/dwm/.local/bin/dmenumount
+++ /dev/null
@@ -1,67 +0,0 @@
-#!/bin/sh
-
-# Gives a dmenu prompt to mount unmounted drives and Android phones. If
-# they're in /etc/fstab, they'll be mounted automatically. Otherwise, you'll
-# be prompted to give a mountpoint from already existsing directories. If you
-# input a novel directory, it will prompt you to create that directory.
-
-getmount() { \
-	[ -z "$chosen" ] && exit 1
-        # shellcheck disable=SC2086
-	mp="$(find $1 2>/dev/null | dmenu -i -p "Type in mount point.")" || exit 1
-	test -z "$mp" && exit 1
-	if [ ! -d "$mp" ]; then
-		mkdiryn=$(printf "No\\nYes" | dmenu -i -p "$mp does not exist. Create it?") || exit 1
-		[ "$mkdiryn" = "Yes" ] && (mkdir -p "$mp" || sudo -A mkdir -p "$mp")
-	fi
-	}
-
-mountusb() { \
-	chosen="$(echo "$usbdrives" | dmenu -i -p "Mount which drive?")" || exit 1
-	chosen="$(echo "$chosen" | awk '{print $1}')"
-	sudo -A mount "$chosen" 2>/dev/null && notify-send "💻 USB mounting" "$chosen mounted." && exit 0
-	alreadymounted=$(lsblk -nrpo "name,type,mountpoint" | awk '$3!~/\/boot|\/home$|SWAP/&&length($3)>1{printf "-not ( -path *%s -prune ) ",$3}')
-	getmount "/mnt /media /mount /home -maxdepth 5 -type d $alreadymounted"
-	partitiontype="$(lsblk -no "fstype" "$chosen")"
-	case "$partitiontype" in
-		"vfat") sudo -A mount -t vfat "$chosen" "$mp" -o rw,umask=0000;;
-		"exfat") sudo -A mount "$chosen" "$mp" -o uid="$(id -u)",gid="$(id -g)";;
-		*) sudo -A mount "$chosen" "$mp"; user="$(whoami)"; ug="$(groups | awk '{print $1}')"; sudo -A chown "$user":"$ug" "$mp";;
-	esac
-	notify-send "💻 USB mounting" "$chosen mounted to $mp."
-	}
-
-mountandroid() { \
-	chosen="$(echo "$anddrives" | dmenu -i -p "Which Android device?")" || exit 1
-	chosen="$(echo "$chosen" | cut -d : -f 1)"
-	getmount "$HOME -maxdepth 3 -type d"
-        simple-mtpfs --device "$chosen" "$mp"
-	echo "OK" | dmenu -i -p "Tap Allow on your phone if it asks for permission and then press enter" || exit 1
-	simple-mtpfs --device "$chosen" "$mp"
-	notify-send "🤖 Android Mounting" "Android device mounted to $mp."
-	}
-
-asktype() { \
-	choice="$(printf "USB\\nAndroid" | dmenu -i -p "Mount a USB drive or Android device?")" || exit 1
-	case $choice in
-		USB) mountusb ;;
-		Android) mountandroid ;;
-	esac
-	}
-
-anddrives=$(simple-mtpfs -l 2>/dev/null)
-usbdrives="$(lsblk -rpo "name,type,size,mountpoint" | grep 'part\|rom' | awk '$4==""{printf "%s (%s)\n",$1,$3}')"
-
-if [ -z "$usbdrives" ]; then
-	[ -z "$anddrives" ] && echo "No USB drive or Android device detected" && exit
-	echo "Android device(s) detected."
-	mountandroid
-else
-	if [ -z "$anddrives" ]; then
-		echo "USB drive(s) detected."
-		mountusb
-	else
-		echo "Mountable USB drive(s) and Android device(s) detected."
-		asktype
-	fi
-fi
diff --git a/dotfiles/dwm/.local/bin/dmenumountcifs b/dotfiles/dwm/.local/bin/dmenumountcifs
deleted file mode 100755
index 46c2b57..0000000
--- a/dotfiles/dwm/.local/bin/dmenumountcifs
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/sh
-# Gives a dmenu prompt to mount unmounted local NAS shares for read/write.
-# Requirements - "%wheel ALL=(ALL) NOPASSWD: ALL"
-#
-# Browse for mDNS/DNS-SD services using the Avahi daemon...
-srvname=$(avahi-browse _smb._tcp -t | awk '{print $4}' | dmenu -i -p "Which NAS?") || exit 1
-notify-send "Searching for network shares..." "Please wait..."
-# Choose share disk...
-share=$(smbclient -L "$srvname" -N | grep Disk | awk '{print $1}' | dmenu -i -p "Mount which share?") || exit 1
-# Format URL...
-share2mnt=//"$srvname".local/"$share"
-
-sharemount() {
-	mounted=$(mount -v | grep "$share2mnt") || ([ ! -d /mnt/"$share" ] && sudo mkdir /mnt/"$share")
-	[ -z "$mounted" ] && sudo mount -t cifs "$share2mnt" -o user=nobody,password="",noperm /mnt/"$share" && notify-send "Netshare $share mounted" && exit 0
-	notify-send "Netshare $share already mounted"; exit 1
-}
-
-sharemount
diff --git a/dotfiles/dwm/.local/bin/dmenurecord b/dotfiles/dwm/.local/bin/dmenurecord
deleted file mode 100755
index b83a7c5..0000000
--- a/dotfiles/dwm/.local/bin/dmenurecord
+++ /dev/null
@@ -1,123 +0,0 @@
-#!/bin/sh
-
-# Usage:
-# `$0`: Ask for recording type via dmenu
-# `$0 screencast`: Record both audio and screen
-# `$0 video`: Record only screen
-# `$0 audio`: Record only audio
-# `$0 kill`: Kill existing recording
-#
-# If there is already a running instance, user will be prompted to end it.
-
-updateicon() { \
-	echo "$1" > /tmp/recordingicon
-	pkill -RTMIN+9 "${STATUSBAR:-dwmblocks}"
-	}
-
-killrecording() {
-	recpid="$(cat /tmp/recordingpid)"
-	# kill with SIGTERM, allowing finishing touches.
-	kill -15 "$recpid"
-	rm -f /tmp/recordingpid
-	updateicon ""
-	pkill -RTMIN+9 "${STATUSBAR:-dwmblocks}"
-	# even after SIGTERM, ffmpeg may still run, so SIGKILL it.
-	sleep 3
-	kill -9 "$recpid"
-	exit
-	}
-
-screencast() { \
-	ffmpeg -y \
-	-f x11grab \
-	-framerate 60 \
-	-s "$(xdpyinfo | awk '/dimensions/ {print $2;}')" \
-	-i "$DISPLAY" \
-	-f alsa -i default \
-	-r 30 \
- 	-c:v h264 -crf 0 -preset ultrafast -c:a aac \
-	"$HOME/screencast-$(date '+%y%m%d-%H%M-%S').mp4" &
-	echo $! > /tmp/recordingpid
-	updateicon "⏺️🎙️"
-       	}
-
-video() { ffmpeg \
-	-f x11grab \
-	-s "$(xdpyinfo | awk '/dimensions/ {print $2;}')" \
-	-i "$DISPLAY" \
- 	-c:v libx264 -qp 0 -r 30 \
-	"$HOME/video-$(date '+%y%m%d-%H%M-%S').mkv" &
-	echo $! > /tmp/recordingpid
-	updateicon "⏺️"
-	}
-
-webcamhidef() { ffmpeg \
-	-f v4l2 \
-	-i /dev/video0 \
-	-video_size 1920x1080 \
-	"$HOME/webcam-$(date '+%y%m%d-%H%M-%S').mkv" &
-	echo $! > /tmp/recordingpid
-	updateicon "🎥"
-	}
-
-webcam() { ffmpeg \
-	-f v4l2 \
-	-i /dev/video0 \
-	-video_size 640x480 \
-	"$HOME/webcam-$(date '+%y%m%d-%H%M-%S').mkv" &
-	echo $! > /tmp/recordingpid
-	updateicon "🎥"
-	}
-
-
-audio() { \
-	ffmpeg \
-	-f alsa -i default \
-	-c:a flac \
-	"$HOME/audio-$(date '+%y%m%d-%H%M-%S').flac" &
-	echo $! > /tmp/recordingpid
-	updateicon "🎙️"
-	}
-
-askrecording() { \
-	choice=$(printf "screencast\\nvideo\\nvideo selected\\naudio\\nwebcam\\nwebcam (hi-def)" | dmenu -i -p "Select recording style:")
-	case "$choice" in
-		screencast) screencast;;
-		audio) audio;;
-		video) video;;
-		*selected) videoselected;;
-		webcam) webcam;;
-		"webcam (hi-def)") webcamhidef;;
-	esac
-	}
-
-asktoend() { \
-	response=$(printf "No\\nYes" | dmenu -i -p "Recording still active. End recording?") &&
-	[ "$response" = "Yes" ] &&  killrecording
-	}
-
-videoselected()
-{
-	slop -f "%x %y %w %h" > /tmp/slop
-	read -r X Y W H < /tmp/slop
-	rm /tmp/slop
-
-	ffmpeg \
-	-f x11grab \
-	-framerate 60 \
-	-video_size "$W"x"$H" \
-	-i :0.0+"$X,$Y" \
-	-c:v libx264 -qp 0 -r 30 \
-	"$HOME/box-$(date '+%y%m%d-%H%M-%S').mkv" &
-	echo $! > /tmp/recordingpid
-	updateicon "⏺️"
-}
-
-case "$1" in
-	screencast) screencast;;
-	audio) audio;;
-	video) video;;
-	*selected) videoselected;;
-	kill) killrecording;;
-	*) ([ -f /tmp/recordingpid ] && asktoend && exit) || askrecording;;
-esac
diff --git a/dotfiles/dwm/.local/bin/dmenuumount b/dotfiles/dwm/.local/bin/dmenuumount
deleted file mode 100755
index 946d12c..0000000
--- a/dotfiles/dwm/.local/bin/dmenuumount
+++ /dev/null
@@ -1,44 +0,0 @@
-#!/bin/sh
-
-# A dmenu prompt to unmount drives.
-# Provides you with mounted partitions, select one to unmount.
-# Drives mounted at /, /boot and /home will not be options to unmount.
-
-unmountusb() {
-	[ -z "$drives" ] && exit
-	chosen="$(echo "$drives" | dmenu -i -p "Unmount which drive?")" || exit 1
-	chosen="$(echo "$chosen" | awk '{print $1}')"
-	[ -z "$chosen" ] && exit
-	sudo -A umount "$chosen" && notify-send "💻 USB unmounting" "$chosen unmounted."
-	}
-
-unmountandroid() { \
-	chosen="$(awk '/simple-mtpfs/ {print $2}' /etc/mtab | dmenu -i -p "Unmount which device?")" || exit 1
-	[ -z "$chosen" ] && exit
-	sudo -A umount -l "$chosen" && notify-send "🤖 Android unmounting" "$chosen unmounted."
-	}
-
-asktype() { \
-	choice="$(printf "USB\\nAndroid" | dmenu -i -p "Unmount a USB drive or Android device?")" || exit 1
-	case "$choice" in
-		USB) unmountusb ;;
-		Android) unmountandroid ;;
-	esac
-	}
-
-drives=$(lsblk -nrpo "name,type,size,mountpoint,label" | awk -F':' '{gsub(/ /,":")}$4!~/\/boot|\/efi|\/home$|SWAP/&&length($4)>1{printf "%s (%s) %s\n",$4,$3,$5}')
-
-if ! grep simple-mtpfs /etc/mtab; then
-	[ -z "$drives" ] && echo "No drives to unmount." &&  exit
-	echo "Unmountable USB drive detected."
-	unmountusb
-else
-	if [ -z "$drives" ]
-	then
-		echo "Unmountable Android device detected."
-	       	unmountandroid
-	else
-		echo "Unmountable USB drive(s) and Android device(s) detected."
-		asktype
-	fi
-fi
diff --git a/dotfiles/dwm/.local/bin/exitmenu b/dotfiles/dwm/.local/bin/exitmenu
deleted file mode 100755
index 54028a7..0000000
--- a/dotfiles/dwm/.local/bin/exitmenu
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/sh
-
-CHOICES="Shutdown\nReboot\nLock\nHibernate\nSuspend\nToggle Airplane Mode\nToggle Powersave Mode"
-CHOSEN=$(echo -e "$CHOICES" | dmenu -i)
-
-case $CHOSEN in
-     "Shutdown") shutdown now ;;
-     "Reboot") reboot ;;
-     "Lock") xscreensaver-command --lock ;;
-     "Hiberbate") systemctl hibernate ;;
-     "Suspend") systemctl suspend ;;
-     "Toggle Airplane Mode") airplanemodetoggle ;;
-     "Toggle Powersave Mode") lowpowertoggle &&  notify-send "Battery Status" "$(acpi -b)" ;;
-esac
-
diff --git a/dotfiles/dwm/.local/bin/monitor b/dotfiles/dwm/.local/bin/monitor
deleted file mode 100755
index 30f04b6..0000000
--- a/dotfiles/dwm/.local/bin/monitor
+++ /dev/null
@@ -1,50 +0,0 @@
-#!/bin/sh
-# Craig Jennings
-# convenience script to switch monitors
-
-# this script assumes there are at most two monitors attached and we want to switch between then
-CHOICES="Laptop\nLaptop-Scaled\nHome-Display\nExternal-Auto\nExternal-Scaled\nVirtualbox"
-
-# laptops always have a monitor connected when running the script.
-LAPTOP=$(xrandr -q | grep primary | awk '$2 == "connected" {print $1}')
-echo "primary monitor is $LAPTOP"
-
-# an external monitor will always be a connected monitor that isn't primary
-EXTERNAL=$(xrandr -q | grep -v primary | awk '$2 == "connected" {print $1}')
-
-# start by resetting
-xrandr -s 0
-
-# disable if called automatically, otherwise you'll want the menu
-# if there's only one monitor connected, setup laptop monitor
-# if [ -z "$EXTERNAL" ]; then
-# 	xrandr -s 0
-#     xrandr --output "$LAPTOP" --auto --dpi 144 --scale 0.6
-# 	exit 0
-# fi
-
-CHOSEN=$(echo -e "$CHOICES" | dmenu -i)
-
-case "$CHOSEN" in
-"Laptop")
-	xrandr --output "$LAPTOP" --auto --output "$EXTERNAL" --off
-	;;
-"Laptop-Scaled")
-	xrandr --output "$LAPTOP" --auto --dpi 144 --scale 0.6 --output "$EXTERNAL" --off
-	;;
-"External")
-	xrandr --output "$EXTERNAL" --auto --dpi 96 --mode 3440x1440 --scale 1.0 --output "$LAPTOP" --off
-	;;
-"External-Auto")
-	xrandr --output "$EXTERNAL" --auto --output "$LAPTOP" --off
-	;;
-"External-Scaled")
-	xrandr --output "$EXTERNAL" --auto --scale 0.6 --output "$LAPTOP" --off
-    ;;
-"Virtualbox")
-    xrandr --output "$LAPTOP" --auto --mode 1920x1080
-    ;;
-esac
-
-# restore the wallpaper after resolution change
-[ -f ~/.fehbg ] && ~/.fehbg
diff --git a/dotfiles/dwm/.local/bin/prompt b/dotfiles/dwm/.local/bin/prompt
deleted file mode 100755
index 666434f..0000000
--- a/dotfiles/dwm/.local/bin/prompt
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-
-# A dmenu binary prompt script.
-# Gives a dmenu prompt labeled with $1 to perform command $2.
-# For example:
-# `./prompt "Do you want to shutdown?" "shutdown -h now"`
-
-[ "$(printf "No\\nYes" | dmenu -i -p "$1" -nb darkred -sb red -sf white -nf gray )" = "Yes" ] && $2
diff --git a/dotfiles/dwm/.local/bin/recordnow b/dotfiles/dwm/.local/bin/recordnow
deleted file mode 100755
index 4e2d04a..0000000
--- a/dotfiles/dwm/.local/bin/recordnow
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/usr/bin/env sh
-# Craig Jennings <c@cjennings.net>
-
-# Start a screen recording using ffmpeg to capture the entire
-# screen along with all audio and the microphone.
-
-# Make sure that ffmpeg is in the path and the destination directory
-# exists.
-
-LOCATION="$HOME/videos/recordings"
-NAME=$(date +'%Y-%m-%d-%H-%M-%S')
-echo $NAME
-
-# create the directory if it doesn't exist
-if [ ! -d "$LOCATION" ]; then
-  mkdir -p "$LOCATION"
-fi
-
-# error out if ffmpeg isn't installed
-if ! command -v ffmpeg &> /dev/null
-then
-    echo "ERROR: ffmpeg couldn't be found. Please ensure it's installed and added to your PATH."
-    exit
-fi
-
-ffmpeg -framerate 30 -f x11grab -i :0.0+ -f pulse -i alsa_input.pci-0000_00_1b.0.analog-stereo -ac 1 -f pulse -i alsa_output.pci-0000_00_1b.0.analog-stereo.monitor -ac 2 "$LOCATION/$NAME".mkv
diff --git a/dotfiles/dwm/.local/bin/remaps b/dotfiles/dwm/.local/bin/remaps
deleted file mode 100755
index c95ac84..0000000
--- a/dotfiles/dwm/.local/bin/remaps
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/sh
-
-# This script is called on startup to remap keys.
-# Decrease key repeat delay to 300ms and increase key repeat rate to 50 per second.
-xset r rate 300 50
-# Map the caps lock key to super, and map the menu key to right super.
-setxkbmap -option caps:super,altwin:menu_win
-# When caps lock is pressed only once, treat it as escape.
-killall xcape 2>/dev/null ; xcape -e 'Super_L=Escape'
-# Turn off caps lock if on since there is no longer a key for it.
-xset -q | grep "Caps Lock:\s*on" && xdotool key Caps_Lock
diff --git a/dotfiles/dwm/.local/bin/samedir b/dotfiles/dwm/.local/bin/samedir
deleted file mode 100755
index 371ec64..0000000
--- a/dotfiles/dwm/.local/bin/samedir
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-# Open a terminal window in the same directory as the currently active window.
-
-PID=$(xprop -id "$(xprop -root | xprop -root | sed -n "/_NET_ACTIVE_WINDOW/ s/^.*# // p")" | sed -n "/PID/ s/^.*= // p")
-PID="$(pstree -lpA "$PID")"
-PID="${PID##*"${SHELL##*/}"(}"
-PID="${PID%%)*}"
-cd "$(readlink /proc/"$PID"/cwd)" || return 1
-"$TERMINAL"
diff --git a/dotfiles/dwm/.local/bin/setbg b/dotfiles/dwm/.local/bin/setbg
deleted file mode 100755
index b72dc7d..0000000
--- a/dotfiles/dwm/.local/bin/setbg
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/sh
-
-# This script does the following:
-#	Run by itself, set the wallpaper (at X start).
-#	If given a file, set that as the new wallpaper.
-#	If given a directory, choose random file in it.
-#	If wal is installed, also generates a colorscheme.
-
-# Location of link to wallpaper link.
-bgloc="${XDG_DATA_HOME:-$HOME/.local/share}/bg"
-
-# Configuration files of applications that have their themes changed by pywal.
-dunstconf="${XDG_CONFIG_HOME:-$HOME/.config}/dunst/dunstrc"
-zathuraconf="${XDG_CONFIG_HOME:-$HOME/.config}/zathura/zathurarc"
-
-trueloc="$(readlink -f "$1")" &&
-case "$(file --mime-type -b "$trueloc")" in
-	image/* ) ln -sf "$(readlink -f "$1")" "$bgloc" && notify-send -i "$bgloc" "Changing wallpaper..." ;;
-	inode/directory ) ln -sf "$(find "$trueloc" -iregex '.*.\(jpg\|jpeg\|png\|gif\)' -type f | shuf -n 1)" "$bgloc" && notify-send -i "$bgloc" "Random Wallpaper chosen." ;;
-	*) notify-send "🖼️ Error" "Not a valid image or directory." ; exit 1;;
-esac
-
-# If pywal is installed, use it.
-if command -v wal >/dev/null 2>&1 ; then
-	wal -n -i "$(readlink -f $bgloc)" -o "${XDG_CONFIG_HOME:-$HOME/.config}/wal/postrun" >/dev/null 2>&1
-# If pywal is removed, return config files to normal.
-else
-	[ -f "$dunstconf.bak" ] && unlink "$dunstconf" && mv "$dunstconf.bak" "$dunstconf"
-	[ -f "$zathuraconf.bak" ] && unlink "$zathuraconf" && mv "$zathuraconf.bak" "$zathuraconf"
-fi
-
-xwallpaper --zoom "$bgloc"
-# If running, dwm hit the key to refresh the color scheme.
-pidof dwm >/dev/null && xdotool key super+F5
diff --git a/dotfiles/dwm/.local/bin/td-toggle b/dotfiles/dwm/.local/bin/td-toggle
deleted file mode 100755
index de1a0e6..0000000
--- a/dotfiles/dwm/.local/bin/td-toggle
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/sh
-
-# If transmission-daemon is running, will ask to kill, else will ask to start.
-
-if pidof transmission-daemon >/dev/null ;
-then
-	[ "$(printf "No\\nYes" | dmenu -i -p "Turn off transmission-daemon?")" = "Yes" ] && killall transmission-daemon && notify-send "transmission-daemon disabled."
-else
-	ifinstalled transmission-cli || exit
-	[ "$(printf "No\\nYes" | dmenu -i -p "Turn on transmission daemon?")" = "Yes" ] && transmission-daemon && notify-send "transmission-daemon enabled."
-fi
-sleep 3 && pkill -RTMIN+7 "${STATUSBAR:-dwmblocks}"