summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
9 dayssession: rofi standardization, feh migration, pre-flight checks, state trackingHEADmainCraig Jennings
9 daysfix(archsetup): remove duplicate multimarkdown and proselint entriesCraig Jennings
These AUR packages were incorrectly duplicated as pacman_install calls, causing false errors during installation. The correct aur_install entries remain in the emacs utilities section. 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
9 daysfeat(archsetup): implement state tracking for resume capabilityCraig Jennings
Enables resuming from where the script left off if interrupted: - State stored in /var/lib/archsetup/state/ as marker files - run_step() wrapper tracks completion, skips completed steps - --status flag shows installation progress - --fresh flag clears state for clean restart - --help flag documents all options - 12 major steps tracked (intro through boot_ux) Example: archsetup --status # check progress archsetup # resume from last step archsetup --fresh # start over 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
9 daysfeat(archsetup): add pre-flight checks before installationCraig Jennings
Validates system requirements before starting: - Disk space (minimum 20GB free on /) - Network connectivity (ping archlinux.org) - pacman available - Running on Arch Linux (/etc/arch-release) Provides clear error messages with recovery hints if checks fail. 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
9 daysdocs(TODO): mark root check and git pull fixes as verified completeCraig Jennings
Both fixes were already implemented: - Root check exists at archsetup:23-27 - git_install and yay installer use safe rm + fresh clone (no git pull --force) 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
9 daysdocs(TODO): mark -debug packages task as verified completeCraig Jennings
Verified on current system: 0 -debug packages installed, yay-debug not present. Fix was implemented via --nodebug flags in archsetup. 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
9 daysdocs(TODO): mark completed tasks from today's sessionCraig Jennings
- nitrogen → feh migration (commit 0601d39) - rofi integration and dunst-matched theme (commit 590aa02) - adwaita-color-schemes disabled (CMake build failure confirmed) 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
9 daysfeat(wallpaper): replace nitrogen with fehCraig Jennings
nitrogen was removed from Arch repos. Migrate to feh: - Add feh to archsetup pacman installs - Update .xinitrc, lf, ranger, and monitor script - feh auto-creates ~/.fehbg for wallpaper restore 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
9 daysfeat(rofi): standardize rofi configuration with dunst-matched themeCraig Jennings
- Add self-contained config.rasi and theme in ~/.config/rofi/ - Remove external ~/code/rofi-themes-collection/ dependency - Match rofi theme colors, font, and border-radius to dunst notifications - Simplify sxhkd keybindings (settings now in config.rasi) - Remove phantom rofi/scripts PATH entry from .profile 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
2025-11-21session: fix GPG/pinentry auth by restarting gpg-agent in xinitrcCraig Jennings
Previous fix (disabling emacs.service) did not resolve the issue. Added reset-auth call to .xinitrc after DISPLAY export so gpg-agent inherits correct environment before apps start.
2025-11-21session: dotfiles sync and GPG/Emacs auth debuggingCraig Jennings
Synced various dotfile configs (calibre, audacious, profile.d, xinitrc). Diagnosed and fixed Emacs/GPG auth issue by disabling systemd emacs.service which lacked DISPLAY environment for pinentry-dmenu.
2025-11-18fix(archsetup): properly disable debug packages system-wideCraig Jennings
Replace invalid --nodebug flags with proper makepkg.conf configuration: 1. Configure makepkg.conf OPTIONS to disable debug packages (line 237-238) - Set OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !debug) - This prevents ALL packages from building debug versions 2. Remove invalid --nodebug flags from yay commands: - Remove from aur_install function (lines 169, 171, 173) - Remove from python-lyricsgenius install (line 957) - --nodebug is not a valid yay/makepkg option in test VM Previous issue: 169 "invalid option 'nodebug'" errors in test logs Expected result: Clean test execution with no debug package warnings 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
2025-11-18fix(archsetup): remove invalid --nodebug flag and add redshift configurationCraig Jennings
Critical fix: - Remove --nodebug flag from yay makepkg command (archsetup:375) * Flag is not supported in makepkg version on test VM * Was causing yay installation to fail with error code 3 Redshift configuration improvements: - Add redshift package installation (archsetup:645) - Fix redshift.conf dimness issues: * Increase gamma from 0.6 to 1.0 (neutral) * Increase brightness-day from 0.9 to 1.0 (full) * Increase brightness-night from 0.7 to 0.8 (less aggressive) - Add redshift to .xinitrc startup services (line 62) - Expand .xinitrc from minimal to full DWM session configuration Additional cleanup: - Remove obsolete startdwm script (replaced by full .xinitrc) 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
2025-11-15feat(archsetup): add firmware management and console font configurationCraig Jennings
- Install mkinitcpio-firmware to silence firmware warnings during upgrades - Configure lat0-16 console font for better TTY readability - Add firmware cleanup task to TODO.org (Method 3: System Hygiene) - Remove old archsetup log file Changes: - archsetup:589 - Add mkinitcpio-firmware AUR package installation - archsetup:963-964 - Configure console font in boot_ux function - TODO.org:419-441 - Add task to remove unnecessary firmware (~600MB savings) Technical details: - Framework laptop only needs intel and atheros firmware packages - mkinitcpio-firmware provides enterprise hardware firmware - lat0-16 font chosen for 2256x1504 high-res display - Eliminates firmware and consolefont warnings during mkinitcpio 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
2025-11-15docs(todo): add dotfiles reorganization taskCraig Jennings
Add TODO [#C] to review and reorganize dotfiles for unused applications. Options: - Move unused configs to dotfiles/unused/ directory - Design better restowing mechanism with Makefile for selective stowing Identified during package cleanup session - many configs remain for removed applications (mpd, ncmpcpp, mopidy, obs-studio, obsidian). 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
2025-11-15refactor(archsetup): streamline packages and update configurationsCraig Jennings
Package removals: - Remove MPD/ncmpcpp/Mopidy music players (no longer needed) - Remove obs-studio, obsidian, VS Code - Remove VirtualBox and related packages (use Docker/gnome-boxes instead) - Remove rust package (will use rustup instead) Package additions: - Add difftastic, eza (modern CLI tools) - Add gimp, audacity, vlc (media applications) - Add insync, protonmail-bridge (sync/communication) - Add multimarkdown, proselint (text processing) Package updates: - Update man → man-db (current package name) - Update pandoc → pandoc-cli (current package name) Configuration updates: - Enable topgrade git repo updates for ~/code/ only - Add inbox/ directory to .gitignore - Add TODO for rustup-based Rust installation 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
2025-11-14fix(archsetup): prevent yay-debug package installation during yay buildCraig Jennings
Add --nodebug flag to makepkg command when building yay from source to prevent creation and installation of yay-debug package. This completes the --nodebug implementation started in the previous commit. 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
2025-11-13fix(archsetup): implement critical bug fixes and test improvementsCraig Jennings
This commit addresses several high-priority bugs and enhances the testing infrastructure: **Bug Fixes:** 1. Add root permission check at script start to fail fast with clear error message 2. Disable debug package installation by adding --nodebug flag to all yay calls 3. Replace unsafe `git pull --force` with safe rm + fresh clone to prevent data loss 4. Add geoclue package with correct systemd service configuration for geolocation 5. Add completion marker for reliable automated test detection **Testing Infrastructure:** - Add comprehensive VM-based testing framework in scripts/testing/ - Fix test script pgrep infinite loop using grep bracket self-exclusion pattern - Add network diagnostics and pre-flight checks - Support snapshot-based testing for reproducible test runs **Package Management:** - Remove anki (build hangs 98+ minutes) - Remove adwaita-color-schemes (CMake build issues) Test Results: 0 errors, 1,363 packages installed in 40 minutes 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
2025-11-12fix: Configure Mopidy for M3U playlists and analog audio outputCraig Jennings
- Set playlists_dir to /home/cjennings/music for M3U discovery - Change default_extension from .m3u8 to .m3u for existing playlists - Configure explicit pulsesink to analog audio device - Reduce buffer_time from 15000ms to 1000ms for local file playback - Prevents Bluetooth audio latency/jumpiness issues 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
2025-11-12feat(music): migrate from MPD to Mopidy for better streaming supportCraig Jennings
- Enhanced MPD config with 16 MB buffer and 30s curl timeout - Discovered buffer_before_play is deprecated in MPD 0.24.6 - Installed Mopidy with mopidy-mpd extension for MPD protocol compatibility - Configured Mopidy with 15-second GStreamer buffer for smooth radio streaming - Analyzed network quality: baroque sonatas radio has 40ms jitter from Germany MPD limitations: - No pre-buffer control for streams (buffer_before_play deprecated) - Fixed 512 KB curl buffer (not configurable) - No replacement for pre-buffering functionality Mopidy configuration: - buffer_time: 15000ms (15 seconds) - stream timeout: 30000ms - MPD protocol on port 6600 (existing clients work) - HTTP interface on port 6680 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
2025-11-10fix(archsetup): disable problematic slow packagesCraig Jennings
Temporarily disable anki and tageditor packages that cause excessive build times and failures during testing: - anki: hangs for 98+ minutes, missing .gitconfig during cargo build - tageditor: hangs indefinitely building qt5-webengine dependency These packages need to be fixed or replaced before re-enabling. 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
2025-11-08feat:mbsyncrc: enhance email synchronization configurationCraig Jennings
Add separate channels for Inbox, Sent, Trash, Archive, Starred, and Spam. Enable `Create`, `CopyArrivalDate`, `Sync All`, and `SyncState` options for each channel. Group channels into 'cmail' for organized synchronization. Drafts and All Mail omitted due to ProtonBridge sync errors; accessible via IMAP if needed.
2025-11-08feat:gpg-agent: enhance configuration with SSH support and cachingCraig Jennings
Add settings for SSH support, prolonged passphrase caching, and display preservation. Improve versatility and reliability of gpg-agent.
2025-11-08fix(archsetup): correct invalid sudo syntax in yay installationCraig Jennings
Fixed critical bug at line 336 that blocked all AUR package installations. Changed invalid 'sudo -u $username -D $build_dir' to proper 'cd $build_dir && sudo -u $username' pattern. Also updated TODO.org: - Marked yay bug task as DONE - Created "Resolved Tasks" section - Moved completed task to archive with resolution notes 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
2025-11-08feat(ghostty): configure terminal to match st appearanceCraig Jennings
Replace default Ghostty template with custom configuration: - Berkeley Mono font (size 12) with stylistic sets - Colors matching st terminal (gray90 on black, pure ANSI colors) - 0.8 background opacity for transparency - Hide titlebar (gtk-titlebar = false) while keeping window decorations - Block cursor style matching st - Shift+enter keybinding 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
2025-11-08feat: add utility scripts for process and auth managementCraig Jennings
Add two new utility scripts to dotfiles: - clobberall: repeatedly kills all processes with given name - reset-auth: resets GPG and SSH authentication agents Both scripts follow existing conventions with proper headers, usage help, and executable permissions. 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
2025-11-08feat: add zoxide smart directory navigationCraig Jennings
Add zoxide installation and configuration to archsetup: - Install zoxide via pacman in Developer Workstation section - Create .profile.d/zoxide.sh with zsh initialization - Alias cd to z for smart directory jumping based on usage patterns This enables automatic directory navigation learning across all fresh Arch installs. 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
2025-11-06update calibre scheduler configCraig Jennings
2025-11-06chore(auth): update encrypted authinfo fileCraig Jennings
Refreshed .authinfo.gpg with latest credentials. No content details displayed due to encryption.
2025-11-06ssh: Add custom log level for cjennings.net hostCraig Jennings
Configure SSH to set LogLevel to ERROR for the cjennings.net host, enhancing security by reducing log verbosity.
2025-11-06adding hey aliasCraig Jennings
2025-11-06add tasks under method org-headers and sorted by priorityCraig Jennings
2025-11-06Create V2MOM strategic framework and migrate TODO.orgCraig Jennings
- Created comprehensive V2MOM with Vision, Values, Methods, Obstacles, Metrics - Converted all 5 methods to prioritized TODO items (96 total tasks) - Enhanced tasks with technical details, line numbers, error messages - Migrated existing TODO.org tasks to V2MOM methods - Moved 16 tasks to someday-maybe, deleted 11 obsolete tasks - Swapped method ordering (Security before Modernization) - TODO.org now contains complete V2MOM as single source of truth 🤖 Generated with [Claude Code](https://claude.com/claude-code) Co-Authored-By: Claude <noreply@anthropic.com>
2025-10-24added uid/pass to link to org-gcalCraig Jennings
2025-10-17updating tidal-dl configCraig Jennings
2025-10-17updating calibre schedulerCraig Jennings
2025-10-17updating calibre configCraig Jennings
2025-10-17wallpaper: reset default backgroundCraig Jennings
2025-10-17mpd.conf: change replaygain settingCraig Jennings
2025-10-16default mimetype for video files now vlcCraig Jennings
2025-10-16added downgrade functionCraig Jennings
- select installed package to downgrade via fzf - hands off to sudo downgrade
2025-10-12updated tasksCraig Jennings
2025-10-12add org-capture shell scriptCraig Jennings
2025-10-12updated authinfo sourcesCraig Jennings
2025-10-12remove emacs daemon (as we're using systemd now)Craig Jennings
2025-10-05updating tasksCraig Jennings
2025-10-05update calibre config files to latestCraig Jennings
2025-10-05chore(system): update .authinfo.gpgCraig Jennings
2025-10-05chore(system): enable unlimited core dump size in .zshrcCraig Jennings
2025-10-05add environment + systemd configs to improve session and app startupCraig Jennings
- Add environment variable file for PATH including custom script locations - Add user systemd service for Emacs daemon with restart on failure - Add geoclue-agent systemd service for redshift location hints - Add environment override for xdg-desktop-portal-gtk service (DISPLAY, XAUTHORITY) - Update .profile to use emacsclient for EDITOR and VISUAL - Comment out auto-startx on tty1
generated by cgit v1.2.3 (git 2.25.1) at 2025-12-10 14:23:28 +0000